bollywood latest news

Compatible with both lithium and Ni-Mh batteries, a Universal Battery Travel Charger is suitable for charging any cell phone, digital camera or PDA phone batteries.

This charger works with batteries with the electrical contacts either on the top or on the side. For battery contacts on the top, simply adjust the metal contact arms on the charger to touch the battery contacts. If the battery contacts are located on the side, users can hook the battery contacts on the metal contact arms for charging.

How to use:

1. Press the plastic clip and place the battery under the two moveable metal contact arms.
2. Adjust metal contact arms to correct positions and align them to the battery contacts. For batteries with more than 2 contacts, start by the furthest left and right contacts.
3. If connected correctly, the polarity ("POW") should light up in red, indicating that the battery is ready to charge. If not, press the Indicator Switch. Users may also try to re-adjust the position of the metal contact arms.
4. After the battery is properly attached, plug the charger into a power outlet.
5. The Fully Charged Indicator ("FUL") will light up in green once the charging completes.

Notes:

1. The charger will turn off automatically when the battery is fully charged.
2. Do not charge any battery with this device for more than 2 hours each time.
3. To avoid shortage of the device, do not allow the 2 moveable metal contact arms to attach to each other.