User Guide – Snap-on Cover
A Snap-on Cover consists of two pieces of hard plastic protective plates to cover the front and the back of your cell phone. There are openings for easy access to phone functions; operation or slide action of the device will not be affected even with the cover on.
Application of the cover is easy. Simply clip the two plastic plates onto your device and you can start enjoying the protection. You can also attach your device onto your belt with the swivel belt clip given, keeping the phone handy for use.
How to Install the Swivel Belt Clip?
1. Locate the hole at the middle of back cover. Plug the locking knob in gear wheel shape into the hole, with the external side of the cover facing upwards.
2. Hold the knob and turn the cover around. Plug the nail into the hole and fasten it using a Philips Head Screwdriver.
3. Affix the adhesive-backed sticker to cover the nail, and apply the two plastic plates onto your phone. Make sure all pieces are securely clipped.
4. Slide the knob into the U-shaped passage of the belt clip until you hear a "click" sound, then you can attach the clip onto your belt.
5. When you want to use the phone, you can take it out easily with just one hand by pressing the locking release button.
Notes:
The Snap-on Cover can be used without attaching the swivel belt clip. If you do not need the belt clip, you can simply clip the two plastic plates on for use.
How to Remove the Snap-on Cover?
To uninstall the cover, you can simply remove it by hand, starting from the sides of it. Or, as a good alternative to using your fingernails, you may also do it with the Removal Tool. The tool has an angled sharp chisel, which you can insert under the cover to separate it from your phone quickly and safely.
Similar to purchasing other cell phone accessories, you are strongly recommended to check the model number of your cell phone beforehand to make sure you get the correct Snap-on Cover.
Application of the cover is easy. Simply clip the two plastic plates onto your device and you can start enjoying the protection. You can also attach your device onto your belt with the swivel belt clip given, keeping the phone handy for use.
How to Install the Swivel Belt Clip?
1. Locate the hole at the middle of back cover. Plug the locking knob in gear wheel shape into the hole, with the external side of the cover facing upwards.
2. Hold the knob and turn the cover around. Plug the nail into the hole and fasten it using a Philips Head Screwdriver.
3. Affix the adhesive-backed sticker to cover the nail, and apply the two plastic plates onto your phone. Make sure all pieces are securely clipped.
4. Slide the knob into the U-shaped passage of the belt clip until you hear a "click" sound, then you can attach the clip onto your belt.
5. When you want to use the phone, you can take it out easily with just one hand by pressing the locking release button.
Notes:
The Snap-on Cover can be used without attaching the swivel belt clip. If you do not need the belt clip, you can simply clip the two plastic plates on for use.
How to Remove the Snap-on Cover?
To uninstall the cover, you can simply remove it by hand, starting from the sides of it. Or, as a good alternative to using your fingernails, you may also do it with the Removal Tool. The tool has an angled sharp chisel, which you can insert under the cover to separate it from your phone quickly and safely.
Similar to purchasing other cell phone accessories, you are strongly recommended to check the model number of your cell phone beforehand to make sure you get the correct Snap-on Cover.
0 comments:
Post a Comment